Smok RPM 5 Pro Pod Kit

SMOK RPM5 PRO POD KIT [CRC] is powered by single 18650 battery with max 80W output. SMOK RPM5 PRO POD KIT features airflow adjustment mechanism, 0.96 inch TFT screen to show vaping data clearly, 6.5 ml cartridge with slide-to-open top fill & child-resistant pod design. SMOK RPM5 PRO POD KIT [CRC] is compatible with New RPM 3 Meshed coil for DL vaping.

Parameters

• Size: 129.4 x 31.2 x 29.5 mm
• Battery: single 18650 battery (get your batteries here!)
• Output: 5W-80W
• Input Voltage: 3.3V-4.2V
• Output Voltage: 0.8V-4.0V
• Resistance range: 0.15ohm-2.5 ohm
• Screen: 0.96 inch TFT display
• Charging Voltage: 5V±0.2V
• Charging Current: Max 1.4A
• Standby Current: <100uA
• Capacity: 6.5 ml
• SMOK RPM3 REPLACEMENT COILS- MESHED 0.15OHM (40-80W)
• SMOK RPM3 REPLACEMENT COILS- MESHED 0.23OHM (20-45W)

Features:

• Glossy finish and rounded edges, stylish look and flowing feel
• Powered by single 18650 battery, max 80W output, Type-C charging
• 0.96 inch TFT screen
• Slide-to-open top fill
• Child-resistant pod design
• Airflow adjustment mechanism
• New RPM 3 Meshed coil for DL vaping
• Intelligent detection:
• Pod detection
• Short circuit protection
• 8s cut-off
• Low-voltage warning

Includes:

• 1 x RPM 5 PRO Device
• 1 x RPM 5 POD (RPM 3 MESHED 0.15 OHM COIL PRE-INSTALLED) (6.5 ML)
• 1 x RPM 3 REPLACEMENT COILS (MESHED 0.23 OHM)
• 1 x Type-C Cable
• 1 x User Manual

Make sure to properly prime each coils and pods before use. Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times. 

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. Thevapestation.ca and any of thevapestation.ca’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. 

Thevapestation.ca and any or all of thevapestation.ca’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless-steel coils.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.